Denon Professional DN-7000AVP, Руководство пользователя

Страница: 9 / 68

9
Playing Files on a USB Flash Drive
A USB flash drive can be connected to the USB port of this unit to play music and picture files. Only USB flash
drives conforming to mass storage class and MTP (Media Transfer Protocol) standards can be played on
DN-700AVP, in the FAT16 or FAT32 format.
The supported file formats are:
WMA (Windows Media Audio), MP3 (MPEG-1 Audio Layer-3), WAV , MPEG-4
AAC , and FLAC (Free Lossless Audio Codec).
To play files on a USB flash drive:
1. If DN-700AVP is off, press the Power button to power it on.
2. Connect your USB flash drive (mass storage class) to the USB port.
3. Select Multimedia as your desired media type and use the Cursor
◄
and
►
buttons on the remote control to
select USB .
4. Select a file from the list displayed on DN-700AVP or your TV/computer monitor.
To move through audio files or folders, press the Cursor
◄
and
►
buttons on the remote control.
Press Enter to open a folder or to select an audio file to begin playing.
Playing Audio from a Bluetooth Device
1.
If DN-700AVP is powered off, press the Power button to power it on.
2.
Use the Source Select knob to choose Bluetooth .
3.
Press the Bluetooth button.
4.
Navigate to your Bluetooth device’s setup screen, find “DN-700AVP” and connect.
5.
Begin to play music on your Bluetooth device.
To disconnect a paired Bluetooth device, press and hold the Bluetooth button for 3 seconds. Alternatively,
use the Source Select knob to choose another playback source and disconnect pairing.
Note: If your Bluetooth device prompts for a pairing code, enter 0000 .
Listening to the Radio
1.
If DN-700AVP is powered off, press the Power button to power it on.
2. Use the Source Select knob to choose Tuner . The audio from the broadcast will start automatically.
Important: Make sure you have properly connected the FM antenna.
3. To select a radio station, use the Tuner -/+ buttons on the unit or the Tuning -/+ buttons on the remote
control. Hold either the or Tuning – button down for 2 seconds to scan and stop at the next radio
station with a strong signal.
Note: RDS is a method for the transmission of additional information via VHF stations. For example, the name
of the station broadcasting, the name of the program, or the type of program will be shown on the
multifunction display. It can only function if the local broadcasting stations have the RDS transmission and the
signal is strong enough.
To save/recall a radio station preset:
1. If DN-700AVP is powered off, press the Power button to power it on.
2. Use the Source Select knob to choose Tuner .
3. Select a radio station using the Tuner -/+ buttons on the unit or the Tuning -/+ buttons on the remote
control.
4. Press the Mem button on the remote control, then press the Tuning -/+ buttons to select a preset memory
location. Press the Mem button again to save the radio station to the selected location.
5. To recall a saved radio station, press the S/- buttons to cycle through the saved radio station presets.