11
Playing Audio Files on a USB Flash Drive
To play audio files on a USB flash drive:
1.
If the unit is off, press the
Power
button to power it on.
2.
Connect your USB device (mass storage class) to the
USB Port
.
3.
Select USB as your desired media type (described in
Selecting the Media Playback Mode
).
4.
Select an audio file:
•
When a USB flash drive is first connected, files on the root directory will be shown. Press and hold the Folder
button to open to the first folder. All files within that folder will appear first. All other playable content on the
flash drive will appear after. To access another folder, press and hold the Folder button again.
•
To move through audio files,
turn the
Jog Dial
on the unit.
•
Press one of the
Number
buttons
(
0
–
9
) to enter the desired track number. If the track number is two digits,
press the buttons in succession (e.g.,
1
then
2
for Track 12).
In USB Mode, you can perform any of the following operations:
•
To start, resume, or pause playback,
press the
Play
/
Pause
button.
•
To stop playback,
press the
Stop
button.
•
To rewind or fast-forward through the track,
press and hold one of the
Search
buttons. The track will
rewind/fast-forward at
5
times the normal playback speed. To resume playback, release the button.
•
To change the view mode,
press the
Folder/Time
button.
•
To select another folder or audio file,
follow the steps described in
Step 4
above.
•
To show different track information in the display,
press the
Text
button. It will cycle through the file name
and other text information.
•
To select a Repeat Playback mode,
press the
Repeat
button. It will cycle through
Repeat One
(the same
track will repeat indefinitely),
Repeat All
(the list of all tracks will repeat indefinitely), and
Repeat Off
(no tracks
will repeat).
•
To change the Time Mode in the display,
press the
Time
button. It will cycle through
Elapsed
(how much time
has elapsed of the current track) and
Remaining
(how much time remains of the current track).
•
To remove a USB device,
gently remove it from the
USB Port
when it is
not
playing
. (Removing a USB device
while it is playing can damage it.)
Playing Audio from a Bluetooth Device
To play Bluetooth Tracks:
1.
If the unit is off, press the
Power
button to power it on.
2.
Select
Bluetooth (BT)
as the media type (described in
Selecting the Media Playback Mode
).
3.
Navigate to your Bluetooth device’s setup screen, find “DN-500CB” and connect.
Note:
If your Bluetooth device prompts for a pairing code, enter
0000
.
In Bluetooth Mode, you can perform any of the following operations:
•
To start, resume, or pause playback,
press the
Play
/
Pause
button.
•
To pause playback,
press the
Stop
button.
•
To remove the list of paired devices and disconnect from any currently paired device
, press and hold the
Clear button to remove all paired devices from the unit’s memory (and also unpair from a currently paired
device). After the devices have been cleared from the unit’s memory, to connect again to the same device, go to
your Bluetooth device and select “Unpair” or “Forget the Device”, depending on the type of device that you
have. You can then select DN-500CB from your list of Bluetooth devices and connect.
Содержание DN-500CB
Страница 2: ...2...
Страница 74: ...74...
Страница 75: ...75...
Страница 76: ...denonpro com Manual Version 1 1...
