background image

3

S500 Plus 

SP20003_REV_1

Certificate of Conformity

Cylinder mowers powered by Honda GX Petrol Engine

Manufacturer:-

 Howardson Ltd, Howardson Works, Kirk Langley, Derby, DE6 4NJ. UK

Owner of Technical Document:-

 Mr I.D. Howard, Howardson Ltd, Howardson Works Kirk Langley, Derby, DE6 4NJ, UK

I the under signed Declare that these machines:-

The reliability and quality of performance of this machine depends upon some simple care maintenance carried out
regularly. This manual has been prepared to allow the user to carry out all such work.

It is advisable to read the instructions carefully. Proper care and attention will enable the machine to give a continuous, 
satisfactory, and reliable service. Failure to carry out regular lubrication and maintenance as outlined in this manual may 
render any guarantee or warranty invalid.

In the case of any difficulty, or if further information or advice is required, our Service Department is always at your call. In 

the interests of speed and accuracy of information please quote the serial numbers of the machine and engine when
making enquiries.

For the machine, this is to be found on a plate attached to the engine deck. The engine number is stamped on either the 
crank case or the gear casing facing towards the front of the machine. We suggest you write the numbers on the front 
page of this book.

Introduction

Serial Numbers

MACHINE SERIAL NUMBER

MAKE A NOTE OF THE SERIAL NUMBERS OF YOUR MACHINE & ENGINE AND ALWAYS 
QUOTE THEM IN ANY COMMUNICATION WITH PERSONNEL AT DENNIS.

NOTE

ENGINE SERIAL NUMBER

Model

Operating Width

Power (Honda)

Measured Sound Power 

Level

Guaranteed Sound 

Power Level

Serial Number

S500 Plus

20” (508mm)

GX120

91dB Lwa

94dB Lwa

See Product ID range

Tested at:- 

Howardson Works test site September 2011

Complies with the applicable requirements of:-
  - Machine Directive  2006/42/EC
  - Noise Directive 

2000/14/EC (Annex V)

Managing Director

Ian Howard

Содержание S500 PLUS























Отзывы: