Dennis E-SERIES ES-34R, Инструкция по эксплуатации

Страница: 19 / 46

19
SP20058_REV0.4
B
A
B
A
B
A
B
A
13. GENERAL ADJUSTMENTS
SETTING FOR HEIGHT OF CUT
Always stop the engine before adjusting the height of cut. Failure to do this may result in serious injury. The length of grass after
cutting depends on the height of the deck in relation to the ground.
To set:
● Turn Hand knob on top deck (View A) to raise and lower deck height.
● Use calibrated depth guage (View B) to measure height of deck.
●
Remember height of cut is affected by moisture of turf , weight of machine and the thatch density. Different makes of machine
cut at different heights. We suggest you set it to a couple of mm above your planned height and then come down in height by
trial.
DECK BELT ADJUSTMENT
To adjust the tension of the cutting belt remove the deck cover. Slacken the three bolts tightening the tension assembly (circled),
then adjust tension view the tensioning belt (arrow). Ensure the belt tension is correct, as an incorrect tension will result in
compromised battery life and potentially cause damage to the machine.