Confidential
and
Proprietary
Information
●
DenMat
Holdings,
LLC
●
1017
W.
Central
Ave.,
Lompoc,
CA
93436
‐
2701
●
1
‐
800
‐
433
‐
6628
●
Page
9
In addition, the FCC and Industry Canada (IC) certificate numbers must appear on the
label as follows:
“
Contains FCC ID: SYS-SOL, IC: 11076A-SOL
”
An example of such label is shown below:
For use in other countries, contact DenMat Holdings, LLC.
b. Information for the User:
FCC requires certain information to be provided in the final product User’s Manual. The
following text must appear in the manual:
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that
may cause undesired operation.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux
appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions
suivantes : (1) l'appareil nedoit pas produire de brouillage, et (2) l'utilisateur de
l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage
est susceptible d'en compromettre le fonctionnement
This equipment has been tested and found to comply with the limits for Class B
Digital Device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This equipment generates and can radiate radio frequency energy and,
if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures.
Reorient or relocate the receiving antenna
Increase the separation between the equipment and receiver
Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected
Consult the dealer or an experienced radio/TV technician for help
YOUR COMPANY NAME Model: 033989500
CONTAINS FCC ID: SYS
-
SOL, IC:
11076A-
SOL
This device complies with Part 15 of the FCC rules subject to the
following two conditions:
1)
This device may not cause harmful interference.
2)
This device must accept all interference received,
including interference that may cause undesired operation.
