Confidential
and
Proprietary
Information
●
DenMat
Holdings,
LLC
●
1017
W.
Central
Ave.,
Lompoc,
CA
93436
‐
2701
●
1
‐
800
‐
433
‐
6628
●
Page
5
b. Electrical
Specifications
Operating voltage range:
3.1VDC to 4.7VDC
Operating current consumption:
< 50mA (in active transmitting mode)
Recommended power source:
3 primary AA size Alkaline or Lithium cells,
1.5V
each
(not included)
Recommended battery holder module: keystone Electronics 2464
(not
included)
c. Switch Interface Specifications:
The 2-pin header, J5, has the following interface specifications:
Voltage sourced from this header:
3VDC nominal
Current sourced out of this header:
1mA maximum
Maximum switch resistance expected:
100 Ohms
Manufacturer and part number for J5 header:
Molex 0022122024
or
equivalent
Recommended mating connector:
Molex 0022012027 housing
Molex
0008550102
contacts
or
equivalent
d. Environmental
Specifications
Operating
temperature:
0ºC
to
+50ºC
Storage
temperature:
-20ºC
to
+70ºC
Relative Humidity:
10% - 95% RH non-condensing
e. RF Communications Specifications
The radio section of this module is categorized as an intentional transmitter within the
unlicensed 2.4GZ ISM band. The details of communications protocol are described in a
separate document which is available upon request from DenMat Holdings, LLC.
The possible frequencies of operation are:
