Page 15
7. Installation
7.1.
Connect
This device must be installed by qualified personnel;
This device must not be installed directly outdoors;
Installation consists of mounting the device, connecting to an IP network,
connecting the I/O, providing power and configuring via a web browser.
7.2.
Power supply requirements
Figure 12.
Location of
DAEnetIP4 12 Relay Module
power jack
The whole module has the following current consumption:
400mA
at 24V DC (and all relays are ON)
700mA
at 12V DC (and all relays are ON)
It is recommended the supply source for
DAEnetIP4 12 Relay Module
to be with
the following parameters:
Supply voltage: 7.5V - 25V DC;
Current: minimum 700mA;
It must be stabilized and filtered;
Type: center positive (the inner pin of the power supply adaptor jack must be
+VCC).