User Manual
bio.x T700 160416
Page 3 of 15
Issued 10/2010
1. Safety instructions
This user manual has been created for the parts cleaning unit bio.x T700. It contains all details needed regarding
correct commissioning, proper operation and maintenance. The instructions in this user manual must be
carefully followed and adhered to.
If the instructions are strictly followed in accordance with the user manual, we accept liability within the scope of
our conditions for guarantees.
National regulations and safety regulations must be observed
.
No changes, extensions or modifications may be made to the product without the manufacturer's
authorisation. No liability is accepted for changes made without the manufacturer's authorisation with the
warranty ceasing to be valid in such a case.
If you have any further questions, please contact us on our service hotline on 0800 - 753-000-2.
This unit can only be used safely if you read this user manual carefully and strictly follow the instructions it
contains. This user manual is an integral part of this unit and must be available to the personnel who
operate the unit at all times.
Such staff must be familiarised with the user manual with particular attention being paid to prohibitions and
hazard warnings.
The mains supply connection has to be in accordance with the corresponding regulations (VDE 01000 -
Association of German Electricians). For safety reasons, the device may only be operated when if a Residual
Current protective Device (RCD) with a release current of 30 mA is connected in series.
Please get it checked
by a qualified electrician.
In accordance with the German BGV A3, electrical equipment has to be examined in regular intervals.
The device must be placed horizontally on a stable surface.
Detergents which contain highly flammable substances must not be used.
Use only detergents
approved by DENIOS for this unit.
2. Technical Data
Dimensions (W x D x H)
1100mm x 910mm x 1725mm
Total height with open hood
2400 mm
Net weight
approx. 80 kg
Power consumption
1.1 kW (when heating turned on)
Electrical connection
1/N/PE 230V
Back-up fuse on site
min 10 A
Working height
950 mm
Load capacity
200 kg
Tank
material PE LD
Maximum fill capacity
120l
Minimum fill capacity
60l
Usable work surface
750-900 mm x 550 mm
Heating system
Stainless steel (1.4541) tubular heating element output 1 kW
Level switch
Minimum fill level (approx. 55l)
Temperature sensor
default setting is 41°C
Pump
approx. 240l/h
approx. 6 bar
Sound pressure level
< 70 dB (A)
The function of the demister requires a compressed air connection.
-
Input pressure, 6 -8.5 bar
-
Pumping capacity 350 l/min
