6
®
Cleaning the Pressure Regular Knob
Check that the pressure regulator knob and the pressure safety
valves are in good working order before each use.
1.
After the unit has cooled, remove the lid.
2.
Press down and turn the pressure regulator knob counter
clockwise past the STEAM setting and carefully remove.
3.
Using a brush, check and remove any food or foreign particles
that may be lodged in the floating valve.
4.
Replace the pressure regulator knob by lining the notches up to
the inside wall of the pressure regulator chamber in the lid and
turn clockwise.
Cleaning/Maintenance
Do not wash any parts of the pressure cooker in the dishwasher.
Always wash the pressure cooker thoroughly after every use, or if it
has not been used for an extended period of time.
1.
Unplug and let the unit cool before cleaning.
2.
Wash the removable cooking pot with warm soapy water. Rinse
and dry thoroughly.
3.
Wipe the outer housing with a clean damp cloth. Do not
submerge in water.
4.
Turn the lid upside down, grasp the rubber gasket on either side
and pull up. Clean the rubber gasket in warm soapy water. Rinse
and dry thoroughly. Replace the gasket by pushing it down
inside the edge of the lid. Make sure the groove in the center of
the gasket is positioned around the metal ring on the inside
edge of the lid. Note: If the gasket is not positioned properly,
the unit will not work.
NOTE: The rubber gasket must always be properly positioned on the
underside of the lid. Check periodically to make sure that it is clean,
flexible, and not cracked or torn. (See pg. 3 “Before First Use”, #3.)
5.
If the rubber gasket is damaged, do not use the appliance and
contact the Customer Service department at 1-800-336-4822.
6.
In order to maintain good performance of your pressure cooker,
the bottom of the removable cooking pot, in the area of the
sensor pad, must be cleaned after each use. Wipe with a soft
damp cloth and be sure to dry thoroughly.
7.
Never use abrasive cleaners or scouring pads to clean any of the
parts.
