Denas MS DiaDENS PCM, Руководство по эксплуатации

Страница: 83 / 111

82
When the device detects the contact between the electrodes and skin surface, indication of
period of time will appear – 5 seconds, during which skin electrical resistance is determined,
after the impulse is sent by the device. After 5 seconds interval the device will emit short
sound signal and the display will show the measurement result as a ALT index (in range from
0 to 100 units), e.g., ALT = 8.
Write down the readings. Set the device to the next zone.
The latent trigger zones are those zones where ALT values significantly differ – upwards or
downwards. For example, under test of nearby areas you get following ALT results (in units):
6, 5, 8, 20, 4, 7. In this case the zone with the index ALT = 20 is considered to be latent trigger
one.
Detected trigger zones should be additionally treated in “THERAPY” mode for 1-5 minute at
60 or 77 Hz frequency. Go to menu:
MENU
→
Treatment
→
«Therapy»
→
60 Hz