Product are imported and distributer by VINA STAR JSC.
Hotline: 1900 588 851
10
E5:Check whether IGBT is over heat or short circuit
E6:Check whether IGBT is open circuit or not work.
E8:Check whether there is water overflowed on the glass top of the
control board.
Built-in Installation
Selection of installation equipment
Cut out the work surface according to the sizes shown in the drawing.
For the purpose of installation and use, a minimum of 5 cm space shall
be preserved around the hole.
Be sure the thickness of the work surface is at least 30mm. Please select
heat-resistant work surface material
to avoid larger deformation caused by the heat radiation from the hotplate.
As shown below:
Below dimensions apply
Weight and Dimensions are approximate. Because we continually strive to
improve our products we may
change specifications and designs without prior notice
L(mm)
W(mm)
H(mm)
D(mm)
A(mm)
B(mm)
X(mm)
730
430
67
63
670
390
50 mini
