1. Getting acquainted with your High Pressure Cleaner
C-200Air V16
Page 6
T
he pressure can be regulated by turning the knob on the spray-gun
lance. Tighten knob for maximum pressure and loosen for low pressure
washing. When using chemical injector, pressure must be adjusted to
low.
Make sure your local power supply specifications are in accordance with the
motors requirement. Refer to the ID-plate on the machine. Do NOT run the
High Pressure Cleaner without sufficient potable water supply as it can cause
cavitation and serious damage to internal pump parts. Do not let the machine
recycle the water (running with Spray-gun trigger not activated) for more than
a minute. This can cause serious damage to the seals.
Pressure Regulating Knob
CAUTION
