____________________________________________________________________________________
Installation Instructions
FJ Cruiser swing out gate
10.) Cap installed. In this picture you will notice there is a
zert fitting for adding grease to the bearing hinge later
on. Do not use this as your only way to grease the
bumper when you are installing it. Make sure you
follow step 2.
11.) The latch system is pretty simple but if you have any
questions about it please refer to the following pictures
for function and use.
Notes: This is the locking pin that should automatically lock the
gate shut and keep it from opening when in the lock position.
Notes: when closing the gate the latch should be in the down
position or pulled back position.
