Page 16
AB20020
19.
Begin by bolting on the Boom Mounting Plate (supplied
with Truss-T Boom) using four 3/8” x 1-1/4” hex head
bolts (#2) and nylon locknuts (#3).
NoTe:
use the
hole to the inside of the mounting plate as shown.
AssemBly INsTRuCTIoNs
20.
Attach the Truss-T Boom Center Section to the Mounting
Plates using four 5/16” x 1-1/2” square u-bolts (#6),nylon
locknuts (#4) and flatwashers (#5). (U-bolts and Locknuts
are supplied with Truss-T Boom.)
NoTe:
The boom mounting brackets and the boom center
section may be mounted using any set of two holes
depending on boom height desired.
9
2
8
2
3
3
7
7
7
10
4
1
1
5
5
6
6
Please order replacement parts by PART No. and desCRIPTIoN.
10
TRuss-T Boom PARTs lIsT
Ref.
PART
No.
No.
QTy.
desCRIPTIoN
1.
02678-95
4 Boom Mounting Plate
2.
00523
4 3/8”-16 UNC x 1-1/4” Hex Head Bolt
3.
02592
4 3/8”-16 UNC Nylon Insert Locknut
4.
02802
8 5/16”-18 UNC Nylon Insert Locknut
5.
00004
8 5/16” Flatwasher
6.
00909
4 5/16”-18 UNC x 1-1/4” Square U-Bolt
7.
00967
6 1/2”-13 UNC x 1-1/4” Hex Head Bolt
8.
02693-76
2 Boom Mtg. Brace
9.
01792-76
2 23” Boom Mtg. Bracket
10.
02178
6 1/2”-13 UNC Nylon Insert Locknut
4
TRUSS-T BOOm INSTALLATION