DEL0236f/Issue 1/March 2012/Page 2 of 2
www.delucelighting.com
LED FLOODLIGHT FITTING INSTRUCTIONS
PLEASE READ THESE INSTRUCTIONS CAREFULLY BEFORE INSTALLATION
LEAVE A COPY FOR THE USER/MAINTENANCE ENGINEER FOR FUTURE REFERENCE
We recommend this fitting is installed by a qualified Electrician.
GUARANTEE
This product is guaranteed in the EU for a period of 5 years from the date of purchase. The guarantee is invalid in the case of improper use,
installation, tampering, removal of the QC date label, installation in an improper working environment or installation not according to the current
edition of the IEE Wiring Regulations (BS 7671). Should this product fail during the guarantee period it will be replaced free of charge, subject
to correct installation and return of the faulty unit. Déluce Lighting does not accept responsibility for any installation costs associated with the
replacement of this product. Your statutory rights are not affected. Déluce Lighting reserves the right to alter specifications without prior notice.
IMPORTANT INSTALLATION INFORMATION
1. Installation should be carried out in accordance with the latest
edition of the IEE Wiring Regulations (BS7671) and taking into
consideration the latest Building Regulations. If in doubt, consult a
qualified electrician.
2. Important: Ensure that ALL electrical connections are tight with no
loose strands including factory made connections.
3.
Before commencing any installation or maintenance work,
ensure electricity is switched off at the mains.
4. Please take note of the maximum rated voltage for your floodlight.
PLEASE NOTE THIS FLOODLIGHT IS MULTI-VOLTAGE - AN
APPROPRIATE 110V STEP-DOWN TRANSFORMER MUST BE
USED WHEN USING THE FLOODLIGHT ON SITE.
5. Please take note of the IP (Ingress Protection) rating of your
floodlight when deciding location.
6. Always allow sufficient slack in the supply cable in order to remove
the floodlight from its position for any future maintenance.
7. Care must be taken for installations where the lens or bezel may
come into contact with bare skin.
8. Please take note of the nearest illuminated surface as detailed on the
product label.
9.
Always check whether the site of the installation can
support the weight of the floodlight.
For safety, 1.5 times the weight of the floodlight is
recommended. If you are unsure do not install.
GENERAL INSTALLATION - SAFETY
1. Please make sure you are safe when working at height.
2. Employ the latest safety regulations and procedures to ensure the
safe installation of this floodlight.
3. When positioning your floodlight out of doors please take note
that outdoor electrical installations should be installed by a
qualified Electrician. Correct circuit protection for all exterior
electrical services should include a residual current device (RCD),
also known as an earth leakage circuit breaker (ELCB). This simple
device ensures that the power is cut off immediately; it detects a
leakage of current to earth, which indicates an electrical fault which
is potentially threatening to life.
Observe these few Simple rules and keep your outdoor electrical
installation safe.
INSTALLATION INSTRUCTIONS
1. Select the required position for the floodlight.
2. Remove the mounting bracket from the floodlight.
3. Fix the mounting bracket to the mounting surface with appropriate
screws and wall plugs, sufficient to take the weight of the fitting.
4. Replace the main body of the floodlight to the bracket, ensuring
that cables are not trapped between the base mounting bracket
and the floodlight,
MOUNTING
BRACkET
MOUNTING BRACkET
RETAINING/ADJUSTMENT BOLTS
5. Connect the floodlight to the mains supply, with an appropriate
junction box or connection fitting, making sure any exposed
connections and joints are sufficiently weatherproofed. When
using with 110V supply make sure the correct CEE plug is fitted to
connect to the transformer.
6. Then make the electrical connections as follows:
LIVE
- (Red or Brown) to a terminal marked
L
NEUTRAL
- (Black or Blue) to a terminal marked
N
EARTH
- (Green/Yellow) to a terminal marked
WARNING - THIS FITTING MUST BE EARTHED
7. Ensure that there are no exposed conductors, loose or trapped
cable strands.
8. Adjust the angle of the floodlight by the retaining/adjustment bolt,
making sure the bolt is retightened.
9. Switch on the power supply to test.
MAINTENANCE
1. Please make sure the power is switched off before starting any
maintenance.
2. In order to maintain good even light coverage, the protective front
cover should be cleaned regularly.
3. For good heat dissipation the floodlight housing should also be
cleaned regularly.
4. Please take care when cleaning the protective front cover or
floodlight housing.
DO NOT USE water or cleaning solutions, cleaning should preferably
be done with a clean dry cloth.
DEL0236f Inst 70-100-140-200W.indd 2
16/03/2012 17:06
