Infrared lens
Sensor head
Dust tube
Transparent cover
12
13
10
10
11
11
12
Main brush cover
Main brush
Clean the main brush
Clear dust tube
If the indicator light of the charging dock
with dust box is always on red, it is
recommended to unplug the power plug,
reverse the dust box, and check whether
the dust channel is blocked by foreign
objects. If the dust tube is blocked, refer to
the figure below, remove the transparent
cover of the dust tube with a screwdriver,
and clean out the foreign objects
Clean the infrared lens/sensor head
Wipe the infrared lens/sensor
head gently with a clean, soft,
dry cloth. It is recommended to
clean it once a month.
Clean the fan filter
Fan filter
The fan filter is under the dust bag. When
the dust accumulates, wipe it with a clean,
soft dry cloth. It is recommended to clean
it once a month.
The main brush is a consumable item and should be cleaned at least once a week. It is
recommended to replace the main brush every 6 or 12 months to ensure the cleaning quality.
1. Turn over the sweeping and mopping robot, press the buckle on the main brush cover, and
remove the main brush cover and main brush.
2. Use a cleaning tool to cut the entangled hair on the main brush, and use the cleaning brush on
other end of the cleaning tool to clean the main brush
。
When flipping, avoid collisions to prevent damage to the lidar.
Violent disassembly is prohibited.
After cleaning the dust tube, put it back in place.
