Maintenance
Replace the dust bag
APP connect
Set the cleaning mode
Fault condition
Power on/Power off/Pause
Automatic recharge/manual recharge
10
11
11
7
8
9
9
10
Scan the QR code below, or search for "Smart Life'
APP in the app store, download and install it. Open
the APP, click "Smart Life" in the upper right corner of
the home page, and follow the prompts to add
devices.
When the dust bag is full, the indicator light of will be white and always on, and the APP will
notify you. Please replace the dust bag in time
。
Due to the upgrade and update of the APP, the
actual operation may be slightly different from the
above description, please operate according to
the current instructions in the APP.
When the sweeping and mopping robot is stationary, press and hold the button for 3 seconds to turn off the machine, and the
power indicator light turns off. During the cleaning process, press button to enter the recharge state, and press button
to pause the cleaning task.
The robot will enter sleep state if there is no operation for 10 minutes; in the sleep state, short press any button to wake up the
machine.
In the cleaning process, short press button to
pause the robot, and short press button the robot
will return to the charging dock with dust box to collect
dust and charge.
The default mode is the whole house cleaning mode;
after connecting the APP, you can choose more
modes in the APP.
When the battery is low in the cleaning process, the
robot will automatically recharging; or after cleaning,
the robot will automatically recharge.
Short press button to pause the robot, remove the mopping
module, add water or clean the mop, then install the mopping
module back, and briefly press button again to continue
cleaning.
● When the robot is abnormal, it will give a voice prompt and the
power indicator will flash red light. For solutions, please refer to
"Troubleshooting".
● If there is no operation for 10 minutes in the fault state, the robot
will automatically enter sleep state
Press and hold button for 3 seconds to turn on the machine; the green light of the power indicator flashes for 5 seconds,
then the green light is always on, the device broadcasts a voice "Welcome to use our Robot vacuum cleaner, I am glad to serve
you", the robot enters the standby state, short press button , turn on Global cleaning mode; or press and hold button
for 3 seconds to turn on the WIFI network.
During charging, the robot cannot be turned off and will not enter sleep state.
Fill the water tank with water or clean the
mop halfway
Open the top cover
Close the top cover
Put in a new dust bag
Pull the dust bag handle upwards and
take out the dust bag
Throw away the dust bag
Network distribution method 1: Wi-Fi fast connection
Press and hold the automatic recharge button for more than 3
seconds, the sweeper will make the first sound of "ding dong", the
voice prompt "start fast network distribution", and the green light of
the power button will flash quickly, entering the fast network
configuration state;
Network distribution method 2: hotspot distribution network
When the Wi-Fi quick connection cannot connect to the network,
please select "hotspot network"
Hotspot distribution network: Press and hold the automatic recharge
button for more than 6 seconds, the sweeper will make a second
“ding dong” sound, the voice prompt “Start AP distribution network”,
and the green light of the host power button will flash quickly,
entering the AP hotspot distribution network state;
reset device
