Deltafox 77002551, Перевод оригинальной инструкции по эксплуатации

Страница: 73 / 196

GB
73
away and cause injuries even
beyond the direct working area.
k) Hold the electric tool only by
the insulated gripping sur-
faces when performing work
in which the cutting tool may
come into contact with hid-
den wiring or its own cord.
Contact with a live wire can
also cause a charge in metal
parts of the device and result in
an electric shock.
l) Keep the cord away from the
rotating attachment tool. If
you lose control of the device,
the power cord can become
separated or caught and your
hand or arm may be pulled into
the rotating attachment tool.
m) Never put the electric tool
down before the attachment
tool has come to a full stop.
The rotating attachment tool
can come into contact with the
surface upon which it is set,
whereby you could lose control
of the electric tool.
n) Never allow the electric tool
to run while you are carrying
it. Your clothing may acciden-
tally come into contact with the
rotating attachment tool and
get caught and the attachment
tool could drill into your body.
o) Clean the ventilation slots of
your electric tool routinely.
The motor air pulls dust into the
housing and, should too much
metallic dust collect, could
cause electrical hazards.
p) Never use the electric tool
near flammable material.
Sparks could ignite this material.
q) Do not use attachment tools
which require liquid coolant.
Using water or another liquid
coolant could lead to electrical
shock.
Additional safety instruc -
tions for all applications
Kickback and corresponding
precautions
Kickback is the sudden reaction
from a chopping or blocked grind-
er attachment such as a grinding
disc, grinding plate, wire brush
etc. Chopping or blocking leads
to sudden stopping of the rotat-
ing attachment. This causes an
uncontrolled electric tool to accel-
erate in a direction counter to the
rotational direction of the attach-
ment tool. If, for example, a grind-
ing disc cuts into the workpiece or
blocks it, the edge of the grinding
disc that digs into the workpiece
can get caught and, through that,
break off the grinding disc or
cause a kickback. The grinding
disc then moves towards or away