19
ADJUSTING SLIDING FIT BETWEEN
TRUNNION AND BEVEL B R A C K E T
After a long period of time it may become necessary to
adjust the sliding fit between the trunnion (A) Fig. 36, and
the bevel bracket (B) by tightening adjusting nut (C)
using a 3/4
socket wrench.
NOTE: This adjustment must be made with the bevel
lock handle (D) loose.
Correct adjustment is when a good snug sliding fit is
obtained between these two parts. This adjustment should
not be too tight that it restricts the tilting movement of the
trunnion (A) when bevel cutting, or too loose that it affects
the accuracy of the saw cut.
Fig. 36
D
C
A
B
