4
5
PROPOSITION 65 WARNING:
PREPARATION
UNPACKING
Dust created by power sanding, sawing, grinding, drilling, and other construction activities may contain
chemicals known to the state of California to cause cancer, birth defects or other reproductive harm.
Some examples are:
• Lead from lead-based paints
• Crystalline silica from bricks and cement and other masonry products
• Asbestos dust
• Arsenic and chromium from chemically-treated lumber
• Your risk from these exposures varies depending on how often you do this type of work. To reduce your exposure to
these chemicals: work in a well-ventilated area and work with approved safety equipment, such as dust masks that
are specifically designed to filter out microscopic particles.
• Avoid prolonged contact with dust from power sanding, sawing, grinding, drilling, and other construction activities.
Wear protective clothing and wash exposed areas with soap and water.
If you have any questions or concerns relative to the use of your tool or the contents of this manual, stop using the tool
and call Delta Power Equipment Corporation Customer Care at 1-800-223-7278.
Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and
hardware contents list. If any part is missing or damaged,
DO NOT
attempt to assemble the product.
Tools required for assembly (not included): Phillips screwdriver, 13mm or adjustable wrench.
Avoid tipping stand until adjustment knobs are locked in place to secure work support rods.
This product requires assembly.
1. Remove the stand and all parts from the carton.
2. Place the stand on the ground.
3. Seperate all parts from the packing materials. Compare parts with the illustration on page 5 to make sure all parts
are found before discarding packing material.
