Delta R2-EC 004 Series Скачать руководство пользователя страница 1

www.deltaww.com

Digitized Automation for a Changing World

*We reserve the right to change the information in this catalogue without prior notice.

Industrial Automation Headquarters

Taiwan: 

Delta Electronics, Inc. 

Taoyuan Technology Center

No.18, Xinglong Rd., Taoyuan District, 

Taoyuan City 330

477

, Taiwan

TEL: +886-3-362-6301 / FAX: +886-3-371-6301

Asia

China: 

Delta Electronics (Shanghai) Co., Ltd.

No.182 Minyu Rd., Pudong Shanghai, P.R.C.

Post code : 201209 
TEL: +86-21-6872-3988 / FAX: +86-21-6872-3996

Customer Service: 400-820-9595

Japan:

 Delta Electronics (Japan), Inc.

Industrial Automation Sales Department 
2-1-14 Shibadaimon, Minato-ku

Tokyo, Japan 105-0012

TEL: +81-3-5733-1155 / FAX: +81-3-5733-1255

Korea: 

Delta Electronics (Korea), Inc.

1511, 219, Gasan Digital 1-Ro., Geumcheon-gu, 

Seoul, 08501 South Korea
TEL: +82-2-515-5305 / FAX: +82-2-515-5302

Singapore: 

Delta Energy Systems (Singapore) Pte Ltd.

4 Kaki Bukit Avenue 1, #05-04, Singapore 417939

TEL: +65-6747-5155 / FAX: +65-6744-9228

India: 

Delta Electronics (India) Pvt. Ltd.

Plot No.43, Sector 35, HSIIDC Gurgaon, 

PIN 122001, Haryana, India
TEL: +91-124-4874900 / FAX: +91-124-4874945

Thailand: 

Delta Electronics (Thailand) PCL. 

909 Soi 9, Moo 4, Bangpoo Industrial Estate (E.P.Z), 

Pattana 1 Rd., T.Phraksa, A.Muang, 

Samutprakarn 10280, Thailand
TEL: +66-2709-2800 / FAX: +66-2709-2827

Australia: 

Delta Electronics (Australia) Pty Ltd.

Unit 2, Building A, 18-24 Ricketts Road,  

Mount Waverley, Victoria 3149 Australia 

Mail: [email protected]
TEL: +61-1300-335-823 / 

+61-3-9543-3720

Americas

USA: 

Delta Electronics (Americas) Ltd.

5101 Davis Drive, Research Triangle Park, NC 27709, U.S.A.
TEL: +1-919-767-3813 / FAX: +1-919-767-3969

Brazil: 

Delta Electronics Brazil Ltd.

Estrada Velha Rio-São Paulo, 5300 Eugênio de 

Melo - São José dos Campos CEP: 12247-004 - SP - Brazil
TEL: +55-12-3932-2300 / FAX: +55-12-3932-237  

Mexico: 

Delta Electronics International Mexico S.A. de C.V.

Gustavo Baz No. 309 Edificio E PB 103

Colonia La Loma, CP 54060

Tlalnepantla, Estado de México
TEL: +52-55-3603-9200 

EMEA

EMEA Headquarters: 

Delta Electronics (Netherlands) B.V. 

Sales: [email protected] 

Marketing: [email protected] 

Technical Support: [email protected] 

Customer Support: [email protected] 

Service: [email protected]

TEL: +31(0)40 800 3900

BENELUX:

 Delta Electronics (Netherlands) B.V.

Automotive Campus 260, 5708 JZ Helmond, The Netherlands 

Mail: [email protected]

TEL: +31(0)40 800 3900

DACH:

 Delta Electronics (Netherlands) B.V.

Coesterweg 45, D-59494 Soest, Germany

Mail: [email protected]

TEL: +49(0)2921 987 0 

France:

 Delta Electronics (France) S.A.

ZI du bois Challand 2, 15 rue des Pyrénées, 

Lisses, 91090 Evry Cedex, France 

Mail: [email protected]

TEL: +33(0)1 69 77 82 60 

Iberia:

 Delta Electronics Solutions (Spain) S.L.U

Ctra. De Villaverde a Vallecas, 265 1º Dcha Ed. 

Hormigueras – P.I. de Vallecas 28031 Madrid 

TEL: +34(0)91 223 74 20 
Carrer Llacuna 166, 08018 Barcelona, Spain

Mail: [email protected]

Italy:

 Delta Electronics (Italy) S.r.l.

Via Meda 2–22060 Novedrate(CO) 

Piazza Grazioli 18 00186 Roma Italy

Mail: [email protected]

TEL: +39 039 8900365

Russia:

 Delta Energy System LLC 

Vereyskaya Plaza II, office 112 Vereyskaya str. 

17 121357 Moscow Russia 

Mail: [email protected]

TEL: +7 495 644 3240

Turkey:

 Delta Greentech Elektronik San. Ltd. Sti. (Turkey) 

Şerifali Mah. Hendem Cad. Kule Sok. No:16-A 

34775 Ümraniye – İstanbul

Mail: [email protected]

TEL: + 90 216 499 9910

MEA:

 Eltek Dubai (Eltek MEA DMCC)

OFFICE 2504, 25th Floor, Saba Tower 1, 

Jumeirah Lakes Towers, Dubai, UAE 

Mail: [email protected]

TEL: +971(0)4 2690148

Delta EtherCAT Remote I/O Module 

R2-ECx004

 User Manual

DELTA_IA-IPC_R2-ECx004_UM_

EN

_2022

1111

Содержание R2-EC 004 Series




































































Отзывы: