M81E / M81DC2 / M812-FX Series User’s Manual
36
This setting allows you to select which key strokes repeat at a rate determined by
the keyboard controller. When Enabled , the typematic rate and typematic delay
can be selected. You can use Typematic Rate (Chars/Sec) to define how many
characters per second are generated by a held-down key. And use Typematic
Delay (Msec) to define how many milliseconds must elapse before a held-down
key begins generating repeat characters.
The available options for Typematic Rate Setting are : [Disabled] [Enabled].
The available options for Typematic Rate (Chars/Sec) are : [6] [8] [10] [12] [15]
[20] [24] [30].
The available options for Typematic Delay (Msec) are : [250] [500] [750] [1000].
6.2.10 Security Option
This item allows you to limit access to the system and setup, or just to setup.
l
l
l
l
l
[Setup]
: The system will boot, but access to setup will be denied if the correct
password is not entered at the prompt.
l
l
l
l
l
[System]
: The system can not boot and can not access to setup page will be
denied if the correct password not entered at the prompt.
Note : Security takes effect only if a password is set. (See set Supervisor/User
Password in this chapter.)
The available options for Security Option are : [Setup] [System].
6.2.11 OS Select For DRAM > 64MB
This item is only required if you have installed more than 64MB of memory and
running the OS/2 operating system. Otherwise, leave this item at the default [Non-
OS2].
The available options for OS Select For DRAM > 64MB are : [Non-OS2] [OS2].
6.2.12 Report No FDD For WIN OS
This setting controls whether report no FDD for WIN OS or not.
The available options for Report No FDD For WIN OS are : [Yes] [No].
After you have made your selection(s) in the Advanced BIOS Features, press
the <Esc> key to go back to the main program screen.
