5. Hardware Installation
M81E / M81DC2 / M812-FX Series User’s Manual
19
of the interface card has notches that match obstructions in the Mini PCI
socket. You must match the notches with the obstructions in order to install the
interface card.
l
Insert the interface card at a 25 degree angle then snap the interface card into
place as shown in the illustration.
Step2:
Install the PPGA370 Processor
l
The M81E/M81DC2/M812-FX series motherboard supports a wide range of
Intel PPGA370 processor include the Celeron and the Coppermine (FC-PGA).
It operate over 66/100/133MHz FSB.
l
This motherboard provides a PGA370 socket (370-Pin Zero Insertion Force ZIF
socket ) which a FC-PGA (Flip Chip Pin Grid Array)) or PPGA (Plastic Pin Grid
Array) package plugs into.
l
FC-PGA : The package technology used on Coppermine -256K processors
for the PGA370 socket.
l
PPGA : The package technology used for Intel Celeron-128K processors
which utilize the PGA370 socket.
l
Follow the steps mentioned below to install the PPGA370 processor :
l
On the motherboard, locate Pin-1 on the processor and PGA370 socket, then
open the locking lever for processor.
Alignment Edge
