Chapter 5 Wiring
7
Chapter 5 : Wiring
Ethernet Network
To UPS 1 To UPS 2 To load
To load
To load
(Figure 5-1: Front view)
1
Use input power cables (not provided) to connect the STS and two UPSs (UPS1
(S1) is the preferred source).
2
Use output power cables (not provided) to connect the STS and loads.
NOTE :
To avoid the loose input/ output power cables, please use the provided
wire mounts and cables ties to fix the input/ output power cables to the
outlets/ sockets firmly. Please refer to the following procedures and
figures.
