Delta HOMECRAFT H26-260L, Инструкция по эксплуатации, Страница: 7 / 76

kNOw YOUR COMPOUNd MITER SAw
Refer to Figure 1.
Using this tool safely requires that you understand the
information provided in this operator’s manual, as well
as the project you are attempting. Before using this
product, familiarize yourself with all operating features
and safety rules.
A.
14-AMP MOTOR: This tool features a powerful
14-amp motor with all ball bearings and externally
accessible brushes for ease of servicing.
B. FENCE: The miter fence supports the workpiece
when making all cuts.
C. THROAT PLATE: The throat plate supports the
workpiece and provides a safe working surface.
D. MITER LOCK: The miter lock handle securely locks
the saw at desired miter angles.
E. MITER CONTROL ARM: Is mounted to the base
at the rear of the saw and controls bevel settings.
It also rotates the head with the base during miter
cuts.
F. MITER GAUGE WITH POSITIVE STOPS: Positive
stops have been provided at 0°, 15°, 22-1/2°, 31.6°,
and 45°. The blade stops have been provided on
both the left and right side of the miter table.
G. HORIZONTAL WORK CLAMP: The horizontal work
clamp helps to position and secure the workpiece
to the fence, ensuring safer operation and more
accurate cuts.
H. BASE: Supports the tool and features mounting
holes.
I. MOUNTING HOLES: Enable you to securely mount
the tool to a stable surface.
J. BLADE WRENCH STORAGE: The included blade
wrench features a Phillips screwdriver at one
end and a hex key at the other. Use the hex key
when installing or removing blade and the Phillips
screwdriver when removing or loosening screws.
When not in use, the wrench can be stored in the
base of the saw.
K. WORK TABLE: Sturdy, large die-cast aluminum work
table provides a level and sturdy work surface.
L. BEVEL LOCK: The bevel lock secures the saw at the
desired angle for bevel cuts. There are positive stop
7
FIGURE 1
(features move clockwise around tool)
A. Motor
B. Fence
C. Throat Plate
d. Miter Lock
E. Miter Control Arm
F. Miter Gauge with Positive Stops
G. horizontal work Clamp
h. Base
I. Mounting holes
j. On-Board wrench
k. work Table
L. Bevel Lock
M. dust Bag
N. Upper and Lower Blade Guards
O. Blade (not visible)
P. Trigger Switch
Q. Spindle Lock
R. Electric Brake (not shown)
S. Laser Guide (not shown)
A
Q
P
O
N
C
B
F
D
E
G
H
I
K
L
M
J
1
2
3
4
5
6
7
FEATURES