Delta HD2105.1, Руководство по эксплуатации

Страница: 26 / 50

HD2105
- 26 -
V2.3
The following table reports the indications provided by the instrument as they appear on the display,
together with their description.
Display indications Explanation
>>>_LOG_DUMP_or_ERAS
transfer or erase data
>>>_PRBE_TYPE type of probe connected
AUTO-HOLD automatic function holding the displayed measurement
BATT TOO LOW - CHNG NOW battery discharged - replace it immediately
BAUDRATE >>> baud rate value
BUFR_1 first buffer value
BUFR_2 second buffer value
BUFR_3 third buffer value
CAL ERR calibration error
COMM STOP printing complete
COMM STRT
printing started
DAY_
day
DUMP_END
data transfer complete
DUMP_In_PROG >>>
data transfer in progress
FUNC CLR
max, min and average values clearing
FUNC CLRD max, min and average values cleared
HOUR hour
LAST CAL m/d h/m last calibration date month/day hour/minutes
LOG In PROG logging in progress
LOG MEM FULL memory full
LOG_CLRD
memory data cleared
LOG_STOP
logging complete
LOG_STRT
logging started
MIN >>> USE_UNIT_TO_ZERO SEC
minutes >>> use the UNIT key to reset the seconds
MNTH
month
NEW_PROB_DET new probe detected
NIL disable current buffer
OFFS offset
OVER maximum limit exceeded
pH RES pH measurement resolution
PLS_EXIT >>> FUNC RES_FOR_FACT ONLY please exit using ESC >>> function reserved to factory calibra-
tion
PRBE_SER #### #### serial number #### #### of the connected probe
PRNT AND LOG INTV printing and logging intervals
PRNT INTV >>> printing interval
PROB COMM LOST lost communication with probe
PROB ERR error - unexpected probe
RCD MODE record function operating mode (max, min, avg)
SET USER BUFR user define buffer value
SLP_MODE_LOG
turning off during recording mode
SLPE%
gain %
SMPL ID REL=RSET SER=PRINT
identifier of the sample - REL=reset - SERIAL=print heading
SYS ERR #
program error number #
UNDR
minimum limit exceeded
YEAR year