Delta Embedded DVR, Руководство пользователя

Страница: 70 / 85

69 / 85
Log in Router, enter into the configuration menu of Router, and set the menu. Then get to port, set the
IP distributed by the Embedded DVR, and set the rule of port mapping, add HTTP and TCP port into
mapping list.
Default access ports of Embedded DVR include HTTP port 80 and TCP port 8000, if the ports are
occupied by the other devices, please modify the default port of the Embedded DVR into other vacant
ports.
The third step
Input the public net IP address in the IE, and add the port number of the Embedded DVR you want to
access after the IP, for example: http://155.157.12.227:81. If you want to access by Client Software,
you can use the outer net TCP port directly.
Notice: for detail configuration setting, please refer to the user manual of Router.
6.3.
NTP FUNCTION
Enable NTP function; make the time synchronization with both the DVR and GPS clock server, to
ensure the accuracy of device time.
6.3.1.
INTERNET CONFIGURATION
Get to the
【
CONFIGURATION
】 → 【
NETWORK
】
, choose
【
Advanced
】
, and then choose
【
NTP
】
to set.
After the device can access the Internet, NTP server can use the standard NTP server as the time. For
example, the server of China’s national research center (IP address: 210.72.145.44). Input the IP
address and domain name of relative server at NTP setting.
To activate NTP, click to choose “Enable”.
The interval of changing time is from 1 to 65535 minutes.
6.3.2.
INTRANET CONFIGURATION
If DVR work under the intranet ,user can set up a privately‐owned server as clock source.NTP address
in DVR configuration fill in privately‐owned NTP address can work.
Privately‐owned NTP server can adopt standard NTP products and accurate time PC system. Please
refer to below instruction when adopt PC system as a NTP server.
NTP Server Set Up under Windows
“Start” menu “Run”
→
(or Win+R), input “regedit” to get into REGEDIT.