Delta DVW SERIES Скачать руководство пользователя страница 45

Страница: 45 / 108

DVW Series Industrial IEEE 802.11 a/b/g/n Wireless AP/WDS/Client/Gateway User Manual

3 - 2 3

Description

Factory Default

Suffix

Specify the Suffix Length and Suffix Process of data.

Notice:

Before you configure the settings of Suffix Length, Suffix Char

and Suffix Process, please remember check the Enable item,

otherwise the Suffix function doesn’t work.

Disable

Suffix Length

Specify the Suffix Length for comparison process. After specify the

Suffix Length, please enter the Suffix Char for process.

Suffix Char (Hex.)

Enter the Suffix Char for comparison process.

0xFF, 0xFF

Suffix Process

Specify the comparison process for the Suffix Length and Suffix Char.



Include Suffix Char:

The data will transmit all the Suffix Char

which user entered in Suffix Char (Hex.). If the Suffix Length is 1,

then only first Suffix Char will be included.



Only Suffix Char 1:

The data will transmit only Suffix Char 1

which user entered in Suffix Char (Hex.).



Not Include:

After the comparison process is complete, the data

will be transmitted without Suffix Char which the user entered in

Suffix Char (Hex.).

Include Suffix

Char

Aging Time

Specify the time for DVW device to force pack the received serial data

into the same data frame.

Notice:

Before you configure the settings of Aging Time, please

remember check the Enable item, otherwise the Aging Time

doesn’t be applied.

Disable/

1000 (ms)

Содержание DVW SERIES













































































































Результаты поиска

Содержание DVW SERIES

Отзывы:

Delta DVW SERIES, Руководство пользователя, Страница: 45 / 108

Результаты поиска

Содержание DVW SERIES

Отзывы: