Delta DVS-G928 series, Руководство пользователя

Страница: 27 / 206

C h a p t e r 3 F e a t u r e d F u n c t i o n s
3 - 9
_3
Description Factory default
IP Interface
You can configure the information of IPv4 and IPv6 in this section.
IPv4 DHCP configurations include:

Enable: check to enable IPv4 DHCP function.

Fallback: specifies the number of seconds for trying to obtain a DHCP lease.

Current Lease: For DHCP interfaces with an active lease, the column shows
the current interface address, as provided by the DHCP server.
IPv4 configurations include:

Address: shows the IPv4 address of the interface in dotted decimal notation. If
DHCP is enabled, this field is not used. The field may also be left blank if IPv4
operation on the interface is not desired.

Mask Length: the IPv4 network mask, in number of bits (prefix length). Valid
values are between 0 and 30 bits for an IPv4 address. If DHCP is enabled, this
field is not used. The field may also be left blank if IPv4 operation on the
interface is not desired.
IPv6 configurations include:

Address: shows the address of the interface. A IPv6 address is in 128-bit
records represented as eight fields of up to four hexadecimal digits with a colon
separating each field (:). For example, fe80::21:cff:fe03:4dc7. The symbol :: is
a special syntax that can be used as a shorthand way of representing multiple
16-bit groups of contiguous zeros; but it can appear only once. It can also
represent a legally valid IPv4 address. For example: 192.1.2.34. The field may
be left blank if IPv6 operation on the interface is not desired.

Mask Length: the IPv6 network mask, in number of bits (prefix length). Valid
values are between 1 and 128 bits for a IPv6 address. The field may be left
blank if IPv6 operation on the interface is not desired.
Input the IP address of the IPv4 network interface.
Note:
After you change the IP address and clicking Apply, we suggest
you to login again, and making sure the URL is the latest IP
address.
192.168.1.5
IP Routes

Delete: Select this option to delete an existing IP route.

Network: The destination IP network or host address of this route. Valid format
is dotted decimal notation or a valid IPv6 notation. A default route can use the
value 0.0.0.0 or IPv6 notation.

Mask Length: The destination IP network or host mask, in number of bits (prefix
length). It defines how much of a network address that must match, in order to
qualify for this route. Valid values are between 0 and 32 bits respectively 128
for IPv6 routes. Only a default route will have a mask length of 0 (as it will
match anything).

Gateway: The IP address of the IP gateway. Valid format is dotted decimal
notation or a valid IPv6 notation. Gateway and Network must be of the same
type.

Next Hop VLAN: The VLAN ID (VID) of the specific IPv6 interface associated
with the gateway. The given VID ranges from 1 to 4094 and will be effective
only when the corresponding IPv6 interface is valid. If the IPv6 gateway
address is link-local, it must specify the next hop VLAN for the gateway. If the
IPv6 gateway address is not link-local, system ignores the next hop VLAN for
the gateway.
0.0.0.0