Delta DVP-FEN01, Руководство по эксплуатации

Страница: 58 / 64

D V P - F E N 0 1 E t h e r n e t C o m m u n i c a t i o n C a r d O p e r a t i o n M a n u a l
3. The users have to select the Enable Data Exchange checkbox, and select Always Enable in the Enable
Condition drop-down list box. They have to enable data exchange 1, and type the first IP address
“192.168.1.6”. Besides, they have to select D200 as the start reception register in PLC A, select D0 as the
start transmission register in the PLC B, select D0 as the start transmission register in PLC A, and select
D0 as the start reception register in PLC B. The number of values which will be sent by PLC B is 100, and
the number of values which will be sent by PLC A is 100. After the users click
Apply , the data exchange
set will be enabled.
4. After PLC A is set, the users have to write the program shown below, and download the program to PLC A.
(1) When PLC A runs, and M20 is turned ON, the value in T0 is written to D0~D99 in PLC A.
(2) The values in D0~D99 in PLC A are written to D0~D99 in PLC B.
(3) The values in D0~D99 in PLC B are written to D200~D299 in PLC A.
(4) When PLC A stops, the data exchange set is still executed, but the ladder diagram in PLC A is not
executed.
6 - 1 8