background image

3- ENG

D29382

• Some cleaning fluids contain substances

which could cause injury to skin, eyes, or
lungs.

Use only cleaning fluids specifically recom-
mended for high pressure washers

. Follow

manufacturers recommendations. 

Do not use

chlorine bleach or any other corrosive
compound. 

• Your washer operates at fluid pressures and

velocities high enough to penetrate human and
animal flesh, which could result in amputation or
other serious injury. Leaks caused by loose
fittings or worn or damaged hoses can result in
injection injuries. 

DO NOT TREAT FLUID

INJECTION AS A SIMPLE CUT! See a
physician immediately!

RISK OF EXPLOSION OR FIRE

DANGER

WHAT CAN HAPPEN

HOW TO PREVENT IT

  Do not use acids, gasoline, kerosene, or any

other flammable materials in this product. Use
only household detergents, cleaners, and
degreasers recommended for use in Pressure
Washers. Work in a well ventilated area.

Use of acids, unapproved chemicals, or
flammable solvents with this product could
cause injury or death.

Restricting

any of the 

pressure washer

ventilation

openings will cause serious

overheating and 

could cause fire.

Never place objects against or on top of
pressure washer. Operate pressure washer

in an open area 

at least 12 inches away from

any wall or 

obstruction

that would restrict the

flow of fresh air to the ventilation openings.

RISK TO BREATHING

DANGER

WHAT CAN HAPPEN

HOW TO PREVENT IT

RISK TO FLUID INJECTION

DANGER

WHAT CAN HAPPEN

HOW TO PREVENT IT

• Injuries can result if system pressure is not

reduced before attempting maintenance or
disassembly.

• To relieve system pressure, place on/off switch

in off position, turn off water supply, and pull
gun trigger until water stops flowing.

• Use only hose and high pressure accessories

rated for pressure higher than your pressure
washer's p.s.i.

• Never place hands in front of nozzle.
• Do not direct discharge stream at persons or

animals.

• Make sure hose and fittings are tightened and

in good condition.  Never hold onto the hose
or fittings during operation.

• Do not operate pressure washer with worn or a

braided hose.

• Never attach or remove wand or hose fittings

while system is pressurized.

Содержание D29382



















Отзывы: