6
7
ASSEMBLY INSTRUCTIONS
3. Install the suspension brackets to the joists with
long wood screws, and secure the suspension
brackets to the fan body
1
by using the short
screws (provided).
4. Remove the fan junction box cover
a
. Using wire
nuts (not supplied), connect house wires to fan
wires
b
as shown in the wiring diagram on page 4.
Reattach fan junction box cover
a
.
5. Connect a 4 in. circular duct
a
(not supplied)
and vent to the outside. Secure it with duct tape
(not supplied) or clamp (not supplied) to make the
connection secure and air tight.
6. Cut a 6 1/2 inches (165mm) dia. opening.
a
Joist
Joist
Fan Body
1
Junction
Box cover
a
Wire nut
b
Joist
Joist
Circular duct
a
6 1/2 inches (165mm) Dia.
Ceiling
Ceiling hole
3
4
5
6
