10
TROUBLESHOOTING
PRODUCT SPECIFICATIONS
PROBLEM
POSSIBLE CAUSE
CORRECTIVE ACTION
The fan is not turning on
1.
Power off
2. Faulty switch
3. Faulty wire connection
1. Make sure power supply is on.
2. Test or replace switch.
3. Check wire in switch box.
The fan seems louder
than it should
1. CFM too great
2. Damper not working
properly or damaged
3. Bend in duct too close
to fan discharge
4. Fan discharge reduced
to fit smaller duct
5. Fan body not securely
attached
1. Be sure the CFM rating on the fan matches the
size of your room.
2. Check damper to ensure it is opening and closing
properly. If the damper has become damaged,
please call Customer Service.
3. Be sure you do not have any sharp bends in duct
closer than 18 in. to the fan discharge.
4. Use recommended size ducting to reduce fan
noise.
5. Be sure the fan is securely attached to your ceiling
joists.
The fan is not clearing
the room
1.
Insufficient intake
airfow within room
2.
Insufficient CFM
1. Be sure a door or window is slightly ajar or opened
to allow airflow. The fan is not able to draw air out
of the room without enough airflow to draw in from.
2. Be sure the CFM rating on the fan matches the
requirements for your room size.
The light is not turning
ON
1.
Power off
2. Faulty switch
3. Faulty wire connection
1. Make sure power supply is on.
2. Test or replace switch.
3. Check wire in switch box.
Model No.
Voltage
(V)
Frequency
(Hz)
Air Flow @
0.1"SP
(CFM)
Power @
0.1"SP
(W)
Max
Current
(Amps)
Weight
(lb.)
Note
LED light spec
90LED-REC-ADJ /
VFB090F4LED1-A
120
60
90
17.5
0.47
8.8
Single
Speed
LED Light: 13W
850 Lumens,
2700K
4000K
5000K
Note: Design and specifications subject to change without notice.
