Delta BR1000, Руководство пользователя

Страница: 18 / 36

Page 18
Number of
flashes
Indicates Solution
2 Motor error Check that the connectors are
connected (on the chainstay) or
contact your retailer.
3 Controller error Contact your retailer.
4 Display error Contact your retailer.
7 Speed sensor error Contact your retailer
8
Low voltage error Recharge the battery.
9
High voltage error Contact your retailer.
ASSIST FUNCTIONS
The display has 2 different assist functions:
• Assist levels (1-5), with the Up/Down buttons.
• "Walk Assist" press and hold to activate.
• Light is toggled on and off by holding down the "Light" button.
• Walk assist is selected by holding down the "Down" button.
Walk-assist allows you to drive up to 4 mph without the use of the pedals and
regardless of the assist level setting. This function is, for example, used on hills and
other rough paths. It is especially helpful when pushing the bike up steep slopes.
TROUBLESHOOTING
If the first LED in the battery indicator starts to flash, this indicates that the system has
detected an error. The numbers of flashes determine the error code.
If there is no power to the LED display check the battery is correctly charged and
correctly installed to the bike. If there is still no power then please contact your retailer
or reach out to us at 800-474-6615 or www.designbydelta.com for Delta Customer
Service.