1. Introduction
This series of product is a new generation of multifunctional standalone access control. It adopts new ARM core
32-bit microprocessor design, which is powerful, stable and reliable. It includes reader mode and standalone
access control mode etc.. It’s widely applied to different occasions, such as offices,residential communities,
villa,bank and prison etc..
2. Features
Read 125KHz EM Card
Operate by infrared remote control
Contains reader mode, the transmission format could be adjusted by users.
Support admin add card, admin delete card and setting card
10,000 card users
The unlocking signal adopts NO,NC,COM output of relay
3. Technical Specifications
Operating Voltage: DC 12-24V
Standby Current: ≤35mA
Operation Current: ≤100mA
Operating Temperature: -20℃~60℃
Operating Humidity: 0%~95%
Maximum Rated Current
：≤
1A
Door Relay Time:0
～
99s
（
adjustable
）
Dimension: 120*56*20mm
4. Installation
Remove the back cover from the keypad using the supplied special screw driver
Drill 2 holes on the wall for the self tapping screws and dig a hole for the cable
Put the supplied rubber bungs into the two holes
Fix the back cover firmly on the wall with 2 self tapping screws
Thread the cable through the cable hole
Attach the keypad to the back cover. (See the figure below)
