Delta 80SF040J24, Инструкция по эксплуатации, Страница: 18 / 24

15
Fig.11
(2) The twisted-pair in the 4 PIN neilsbed is the communication cord to the manual panel.
Please connect one port in the CN15, the another port to the manual panel.
Fig.12
(3) Pull wires to make sure that they are securely latches up, then retain wires with wire
retainer.
Fig.13
Note: The power of every indoor unit should be unity power supply.
(4) The power connection cord have been inserted on the mainboard through the piping hole of
the chassis.Please connect the power connection cord with the breaker. If the power cord is
not long enough,please prolong it with terminal block.
Power connection cord
BN
BU
YEGN
To breaker
Fig.14
(5) Reinstall the wiring cover on the original place and tighten the bolt;
(6) Recover the surface panel.
CAUTION !
Do not use tapped wires, stranded wires, extensioncords, or starburst connections, as they may cause
overheating,electrical shock, or fire.
Do not use locally purchased electrical parts inside the product. (Do not branch the power for the drain
pump, etc, from the terminal block.) Doing so may cause electric shock or fire.)