background image

7-ENG

D26269

Review and understand

all instructions

and 

warnings

in this manual.

Become familiar with the operation and
controls

of the air compressor.

Keep operating area clear

of all persons,

pets, and obstacles.

Keep children away

from the air

compressor 

at all times

.

Do not operate

the product 

when

fatigued or under the influence of
alcohol or drugs.  Stay alert at all times.
Never defeat the safety features

of this

product.

Equip area of operation with a fire
extinguisher.
Do not operate machine with missing,
broken, or unauthorized parts.

HOW TO PREVENT IT

WHAT CAN HAPPEN

WARNING: 

RISK OF UNSAFE OPERATION

Unsafe operation

of your air compressor

could lead to serious injury or death to
you or others.

HAZARD

HOW TO PREVENT IT

WHAT CAN HAPPEN

WARNING: RISK OF SERIOUS INJURY OR PROPERTY
DAMAGE WHEN TRANSPORTING COMPRESSOR

Oil can leak or spill

and could result in

fire or breathing hazard; serious injury or
death can result.  oil leaks will damage
carpet, paint or other surfaces in vehicles
or trailers.

Always 

place COMPRESSOR on a

protective mat when transporting

to

protect against damage to vehicle from
leaks. Remove COMPRESSOR from
vehicle immediately upon arrival at your
destination.

(Fire, Inhalation, Damage to Vehicle Surfaces)

HAZARD

Содержание 66-750































Отзывы: