2
INTRODUCTION
This manual illustrates the stand with roller extension tables assembled to a Delta DC-380 15
″
Planer. The accessory
heavy-duty steel planer stand not only gives a stable support surface for the 15
″
planer, but is equipped with two roller
extension tables that provide added work support and prevent sniping of the wood when planing longer workpieces. Each
table features four (4) large 2 -1/4
″
diameter rollers which will allow smoother, easier infeed and outfeed operations.
UNPACKING AND CLEANING
Your 15
″
planer stand with roller extension tables is shipped in one container. Carefully remove the protective coating
from the machined surfaces of the extension tables. This coating may be removed with a soft cloth moistened with
kerosene.
DO NOT USE ACETONE, GASOLINE OR LACQUER THINNER FOR THIS PURPOSE
. Figure 2, illustrates
the components of the stand. Figure 3 illustrates the components of the roller extension tables.
Fig. 2
Fig. 3
1. Side Supports (2)
2. Upper Stand Support
Brackets (2)
3. Lower Stand Support
Brackets (2)
4. 5/16-18 x 3/4
″
Carriage
Head Screws (16)
5. M8 Flat Washers (16)
6. 5/16-18 Hex Nuts (16)
7. M8 x 30MM Hex Head
Screws (4)
8. M8 Flange Nuts (4)
9. M8.1 Lockwashers (4)
10. Stand Supports (2)
11. Roller Extension Tables (2)
12. 1/4-20 x 3/4
″
Hex Head
Screws (6)
13. 1/4
″
Flat Washers (8)
14. 1/4-20 Hex Nuts (2)
15. M6 x 20 Hex Flange
Screws (6)
16. M6 Flange Nuts (6)
17. Clips (2)
18. Leg Support
1
2
3
7
8
9
6
5
4
11
10
17
15
16
12
14
13
18
