14
Fig. 33
Fig. 34
Fig. 35
Fig. 36
O P E R ATING C O N T R O L S A N D A D J U S T M E N T S
STARTING A N D
STOPPING THE SAW
1.
The on/off switch is located under the switch shield
(A) Fig. 33. To turn the band saw ON , move switch
trigger (B) upward to the ON position.
LOCKING SWITCH
IN T H E
OFF POSITION
W e suggest that when the band saw is not in use, the
on/off switch trigger be locked in the OFF position using
a padlock (C) Fig. 35, through the two holes in the switch
plate, as shown in Fig. 35. NOTE: Padlock shown is
available as accessory model 50-325.
2.
To turn the band saw OFF , simply push down on
the switch shield (A) Fig. 34.
TA B L E INSERT
Place table insert (A) Fig. 36, into the hole provided in
the table surface, making certain the pin (B) in the table
engages one of the indents in the table insert.
A
B
A
C