10
Fig. 26
Fig. 27
TEN INCH WET
GRINDING WHEEL
The ten inch aluminum oxide grinding wheel operates at
a slow speed of 70 RPM, which makes it suitable for
honing cutting tools such as garden tools, chisels and
sharpening axes, as shown in Fig. 26.
During operation, the water level in the reservoir (A)
Fig. 26, should be kept at a one inch depth. This will keep
the wheel constantly wet while rotating and keep hard-
ened tools cool without damaging their temper. The large
wheel also is used to remove burrs from tools requiring
keen edges.
The sliding angle jig is used to sharpen tools with com-
pound cutting angles, as shown in Fig. 27.
Adjust the tool rest so it supports the tool at the exact
grinding angle close to the grinding wheel, and observe
all safety precautions before applying power to the
machine.
Delta Building Trades and Home Shop Machinery
Two Year Limited Warranty
Printed in U.S.A.
A
Delta will repair or replace, at its expense and at its option, any Delta machine, machine part, or machine
accessory which in normal use has proven to be defective in workmanship or material, provided that the
customer returns the product prepaid to a Delta factory service center or authorized service station with
proof of purchase of the product within two years and provides Delta with reasonable opportunity to
verify the alleged defect by inspection. Delta may require that electric motors be returned prepaid to a
motor manufacturer’s authorized station for inspection and repair or replacement. Delta will not be respons-
ible for any asserted defect which has resulted from normal wear, misuse, abuse or repair or alteration
made or specifically authorized by anyone other than an authorized Delta service facility or representative.
Under no circumstances will Delta be liable for incidental or consequential damages resulting from defec-
tive products. This warranty is Delta’s sole warranty and sets forth the customer’s exclusive remedy, with
respect to defective products; all other warranties, express or implied, whether of merchantability, fitness
for purpose, or otherwise, are expressly disclaimed by Delta.
