background image

TABLE OF CONTENTS

IMPORTANT SAFETY INSTRUCTIONS ................................... 2
SAFETY gUIdELINES - dEFINITIONS .................................... 3
gENERAL SAFETY RULES ...................................................... 3
AddITIONAL SPECIFIC SAFETY RULES ............................... 4
POwER CONNECTIONS .......................................................... 6
MOTOR SPECIFICATIONS ....................................................... 6
gROUNdINg INSTRUCTIONS  ................................................ 6
ExTENSION CORdS  ................................................................ 7
KEY FEATURES ANd COMPONENTS .................................... 7
FUNCTIONAL dESCRIPTION .................................................. 7
PROdUCT SPECIFICATIONS ................................................... 8
UNPACKINg .............................................................................. 8
ASSEMBLY ................................................................................. 9

Attach Spark Shield and Grinding Shield  .......................... 9
Attach Tool Rest .................................................................. 9
Tool Storage....................................................................... 10
Confirm Tightness of Arbor Nuts ...................................... 10

OPERATION ............................................................................. 11

Starting And Stopping  ...................................................... 11
Locking the Machine  ........................................................ 11
Using the Variable Speed Control ..................................... 11
Using the Flexible Lamp .................................................... 11

MAINTENANCE 

Grinding Wheels ................................................................ 12
Dressing the Wheels .......................................................... 12
Replacing or Changing Grinding Wheels .......................... 13

OThER RECOMMENdEd MAINTENANCE .......................... 13
ACCESSORIES ........................................................................ 14
wARRANTY ............................................................................. 14
REPLACEMENT PARTS .......................................................... 15
SERvICE ANd REPAIRS ......................................................... 15
FRANÇAIS ................................................................................ 16
ESPAÑOL ................................................................................. 30

IMPORTANT SAFETY INSTRUCTIONS

                   

REAd ANd UNdERSTANd ALL wARNINgS ANd OPERATINg INSTRUCTIONS BEFORE USINg 

ThIS EQUIPMENT.

 Failure to follow all instructions listed below, may result in electric shock, fire, 

and/or serious personal injury or property damage.
Woodworking can be dangerous if safe and proper operating procedures are not followed. As with all 

machinery, there are certain hazards involved with the operation of the product. Using the machine with 

respect and caution will considerably lessen the possibility of personal injury. However, if normal safety 

precautions are overlooked or ignored, personal injury to the operator may result. Safety equipment such 

as guards, push sticks, hold-downs, featherboards, goggles, dust masks and hearing protection can reduce your 

potential for injury. But even the best guard won’t make up for poor judgment, carelessness or inattention. 

Always 

use common sense

 and exercise caution in the workshop. If a procedure feels dangerous, don’t try it. Figure out 

an alternative procedure that feels safer. 

REMEMBER:

 Your personal safety is your responsibility. For additional 

information please visit our website 

www.deltaMachinery.com.

                           This  machine  was  designed  for  certain  applications  only.  DELTA

®

 Power Equipment Corporation 

strongly recommends that this machine not be modified and/or used for any application other than 

that for which it was designed. If you have any questions relative to a particular application, DO NOT use the 

machine until you have first contacted DELTA

®

 to determine if it can or should be performed on the product.

If you have any questions relative to its application DO NOT use the product until you have written DELTA

®

 Power 

Equipment Corporation and we have advised you. Contact us online at www.DeltaMachinery.com or by mail at 

Technical Service Manager, DELTA

®

 Power Equipment Corporation, 4825 Highway 45 North, Jackson, TN 38305.

Information regarding the safe and proper operation of this tool is available from the following sources:

•  Power Tool Institute, 1300 Sumner Avenue, Cleveland, OH 44115-2851or online at www.powertoolinstitute.com
•  National Safety Council, 1121 Spring Lake Drive, Itasca, IL 60143-3201
•  American National Standards Institute, 25 West 43rd Street, 4 floor, New York, NY 10036 www.ansi.org - ANSI 01.1 

Safety Requirements for Woodworking Machines

•  U.S. Department of Labor regulations www.osha.gov

2

Содержание 23-198













































Отзывы: