background image

20

PARTS, SERVICE OR WARRANTY ASSISTANCE

All  DELTA

®

 Machines and accessories are manufactured to high quality standards and are serviced by a network of an 

Authorized Service Centers. To obtain additional information regarding your product or to obtain parts, service, warranty 

assistance, or the location of the nearest service center, please call 1-800-223-7278.

                                  Five Year Limited Warranty

 1. WHAT IS COVERED.

 

Delta Power Equipment Corporation (“Company”) will, at its option, repair or replace this product, if 

purchased at retail in the United States or Canada and the product, with normal use, has proven to be defective in workmanship or 
material, subject to the conditions stated in this Limited Warranty. This Limited Warranty covers only materials and labor. All transportation 
costs are Customer’s responsibility.

 2. WARRANTY PERIOD

.

 

All warranty claims must be submitted within five years from the date of retail purchase. For all service parts 

and factory refurbished products, the warranty period is 180 days.

 3. HOW TO OBTAIN SERVICE.

 

To obtain warranty service, you must return the defective product, at your expense, to a service 

center authorized by Company to perform warranty service (a “Company Authorized Service Center”) within the applicable warranty period, 
together with acceptable proof of purchase, such as your original receipt bearing the date of purchase, or product registration number. 
Company reserves the right to restrict warranty claim service to the country where the purchase was made and/or to charge for the cost to 

export service parts or provide warranty service in a different country. For this purpose, on-line purchases are deemed made in the United 

States. For the location of your nearest Company Authorized Service Center, call Company’s Customer Care Center at (800) 223-7278.

 4. EXCLUSIONS:

● 

Company does not offer any warranty on products purchased in used or damaged condition.

● Company does not warrant any products purchased outside the United States or Canada
● Company will not be responsible for any damage that has resulted from normal wear, misuse, abuse or any repair or alteration made by 

anyone other than a Company Authorized Service Center or a designated representative of Company’s Customer Care Center.

All IMPLIED WARRANTIES

 

are expressly limited to the warranty period identified above.

Company will not be liable for INCIDENTAL OR CONSEQUENTIAL

 

damages.

This limited warranty is Company’s sole warranty and sets forth the customer’s exclusive remedy with respect to defective products; all 

other warranties, express or implied, whether of merchantability, fitness for purpose, or otherwise, are expressly disclaimed by Company, 

except as expressly stated in this warranty statement.
Some states do not allow the exclusion or limitation of incidental or consequential damages, or the limitation of implied warranties, so the 

above limitations or exclusions may not apply to you. This warranty gives you specific legal rights and you may have other rights which vary 

in certain states or provinces. For further details of warranty coverage and warranty repair information, call (800) 223-7278. 

LATIN AMERICA:

 

This warranty does not apply to products sold in Latin America. For products sold in Latin America, call the 

local company or see website for warranty information. 

REPLACEMENT PARTS

SERVICE AND REPAIRS

FREE WARNING LABEL REPLACEMENT

Use only identical replacement parts. For a parts list or to order parts, visit our website at www.DeltaMachinery.com/service. 

You can also order parts from your nearest Authorized Warranty Service Center or by calling Technical Service Manager  

at 1-800-223-7278 to receive personalized support from one of our highly-trained representatives.

All quality tools will eventually require servicing and/or replacement of parts. For information about Delta Power Equipment  

Corporation, its factory-owned branches, or to locate an Authorized Warranty Service Center, visit our website at 

 

www.DeltaMachinery.com/service or call Customer Care at 1-800-223-7278. All repairs made by our service centers are fully 

guaranteed against defective material and workmanship. We cannot guarantee repairs made or attempted by others. By calling 

this number you can also find answers to most frequently asked questions 24 hours/day. You can also write to us for information 

at Delta Power Equipment Corporation, 2651 New Cut Road, Spartanburg, SC 29303 - Attention: Technical Service Manager. Be 

sure to indicate all of the information shown on the nameplate of your saw (model number, type, serial number, date code, etc.).

If your warning labels become illegible or are missing, call 1-800-223-7278 for a free replacement. 

Содержание 22-590X






















Отзывы: