10
KNIFE TRANSFER TOOL
STORAGE
1.
The knife transfer tool (A) Fig. 20, supplied with your
planer, can easily be stored underneath the outfeed
table extension (B) when not being used. A Velcro strip
(C) is provided on the tool and underneath the table for
this purpose.
2.
Figure 21 illustrates the knife transfer tool (A) stored
underneath the outfeed table extension.
CORD STORAGE
1.
Wire hangers (D) Fig. 21, are provided underneath
the outfeed table extension to store the planer power
cord when the machine is not in use.
2.
Figure 22 illustrates the planer power cord (E)
wrapped around the wire hangers.
WRENCH STORAGE
The wrench and wrench holder (A) Fig. 23, can be stored
in hole (B) located on the right rear side of the machine
as shown.
Fig. 20
Fig. 21
Fig. 22
Fig. 23
B
C
A
C
D
D
A
E
A
B
