7.
Attach the camera base to the self levelling mount
Locating pins
Tighten bolt
8.
Push the two alignment marker fibre optic cables into the holes in the
flash adapter.
9.
Adjust the balance weights so that the bubble indicator is within the
central circle of the bubble level. Tighten the thumbscrews to lock the
weights in position.
10. Re-check the mount is level whenever you change the balance of the
camera, e.g. change the battery or flashcard, or reposition the
monitor.
The system is now assembled and ready for use.
18
z
Appendix
SLM8 User Manual v 1
