INSTRUCTIONS fOR USe
56
57
EN
Starting up the equipment
• Make sure there is enough water in the tank (2);
if not, top up with water as explained in section
“Water filling” (page 55).
• Check that the capsule lever (5) is closed.
• Press the button (13) to “ON”. The On/Off general
light (14) goes on and the boiler starts heating the
water.
• Press one of the front options (11 or 12).
• Wait for the correct operating temperature to be
attained. This will be signaled by the front 3 LEDs
emitting a steady green light.
• The machine will then be ready to use.
Carefully check that during these operations the
lever is closed and the water tank is filled.
Before producing the first coffee
• Do not insert a capsule. Place a cup under the
dispense spout, press one of the extraction/pour
buttons (11 or 12) and draw a cup of hot water.
This operation is necessary to ensure that the machine
mechanism is correctly primed.
EQUIPMENT START UP
The first time you use the equipment, or if it has not been
used for a long time,the following must be done:
• Gently remove the machine water tank (2) and rinse
thoroughly with tap water. After washing, gently dry
and fill with fresh water according to “Water filling”
(page 55).
Carefully place the water tank back into the machine
housing.
• Press the General On/Off button (13) to the “ON”
position. The On/Off LED (14) will illuminate (red)
and the equipment will enter stand by mode.
14
11
