Delta-q NDIQ 7323, Инструкция по эксплуатации

Страница: 11 / 76

EN INSTRUCTIONS AND MODE OF USE
10
USING YOUR COFFEE MACHINE
Using your coffee machine for the first time
Confirm whether any accessories are missing and that the equip-
ment is not damaged.
Then clean the inner parts following the steps below:
• Remove all the protective materials and storage adhesives from
the machine components.
• Remove it and open the cover and fill with 1 L of water (see Fig. 3 ).
• Once the water tank has been filled replace it in the correct
position and check if it is properly installed (see Fig. 4 ).
• Connect the electrical plug to the respective earthed socket.
• Switch the On/Off general button which is located at the back
of the equipment (see Fig. 5 ).
The buttons on the control panel will blink in sequence (green
colour) when the equipment starts to pre-heat (approximately
60”) (see Fig. 6 ).
• As soon as the buttons on the control panel stop blinking in
sequence (green colour), the pre-heating is over (see Fig. 7 ).
• Put a cup (with capacity exceeding 180cc) on the cup tray
under the extraction nozzle.
Press the tea extraction button/water button/purge to rinse
the machine, repeat three times.
A. B. C.
Fig. 3: Remove the water tank and fill
with water.
Fig. 4: Install the water tank in the
machine.
Fig. 5: On/Off general button.
Fig. 6:
Pre-heating of equipment.
Fig. 7: Ready for use.
A. B. C.