Delta OHM HD3406.2, Руководство пользователя, Страница: 29 / 44

- - 29
Command Response Description
LUBn
&
Sets the unit of measurement for the conductivity n=0 > μ S/cm
n=1 >
Ω
n=2 > TDS
n=3 > NaCl
RA & # Reading of LOG/PRINT interval set
RP & 600 Battery level (Resolut. 0.01V)
RUA U= °C Temperature measurement unit
RUB U= uS Conductivity measurement unit
WA# &
Setting LOG/PRINT interval.
# is a hexadecimal number 0…D that represents the position of the in-
terval in the list 0, 1, 5, 10, …, 3600 seconds.
WC0 & Setting SELF off
WC1 & Setting SELF on
Command characters are exclusively upper case characters. Once a correct command is entered, the
instrument responds with "&"; when any wrong combination of characters is entered, the instrument
responds with "?". The instrument response strings end with the sending of the CR command (Car-
riage Return). The instrument does not send the LF command (Line Feed).
Before sending commands to the instrument via the serial port, locking the keyboard to avoid func-
tioning conflicts is recommended: use the P0 command. When complete, restore the keyboard with
the P1 command.