Delta OHM HD32.8.16, Руководство пользователя, Страница: 3 / 48

- 3 -
HD32.8.8 and HD32.8.16
1. ON/OFF key: It turns the instrument on and off.
2. TIME key: It allows the display of date and time , in the first line for about 8 seconds.
3. SHIFT FNC key: It activates the Shortcut window.
4. Graphic display.
5. Function keys F1 , F2 , F3 : Activate the function in the bottom line of the display.
6. ENTER key: In the menu, it confirms the data entered.
7. ESC key: It allows to exit from the menu or, in case of a submenu, to exit from the current
level display.
8. Navigation keys ▲▼◄► : Allow navigation through the menus. During measurement, you
can select the type of thermocouple using the ▲▼ arrows. Using the ◄► arrows, you can
display the inputs in groups of four ( the probes from C1 to D4 are present in the HD32.8.16
model ).
9. PRINT key: It starts and ends the data transfer to the serial/USB communication port.
10. MEM key: It starts and ends the recording of the data.
11. SETUP key: It allows to enter and exit the instrument’s functioning parameter setting menu.
12. Inputs for thermocouple probes, standard miniature connectors: 8 inputs for the HD32.8.8, 16
inputs for the HD32.8.16.
13. Battery compartment.
14. USB type B port.
15. Sub D 9-pole male connector for the RS232C serial port.
16. Power supply input 12Vdc/1A – external
∅
5.5mm, internal
∅
2.1mm. The power supply
positive (pole) must be connected to the central pin.