Delta OHM HD32.3, Руководство по эксплуатации

Страница: 47 / 74

HD32.3
- 47 -
V1.4
Command Response Description
C2 Probe 2 type, serial number, calibration date
C3 Probe 3 type, serial number, calibration date
GC Print instrument's heading
GB
ID=0000000000000000
User code (set with T2xxxxxxxxxxxxxxxx)
H0 Tw= 19.5 øC Print wet bulb temperature
H1 Tg= 22.0 øC Print globe thermometer temperature
H2 Ta= 21.6 øC Print air temperature (dry bulb);
H7 WBGT(i)= 23.0 øC Print indoor WGBT (without solar radiation)
H8 WBGT(o)= 24.0 øC Print outdoor WGBT (with solar radiation)
LN A00 -A01 -A02 -A03 - ..
- .. - .. - .. - .. - ..
- .. - .. - .. - .. - ..
- .. -
Print instrument memory map: if a section is allocated a
number is displayed, if it is free 2 points (..) are displayed.
LFn !Log n.= 0!started
on:!2006/01/01 00:37:32
Print memory n section status. The number, the storage
start date and time are displayed. (n= hexadecimal number
0-F). If the section is empty:“-->No Log Data<--“
LDn Print data stored in section n.
If the section is empty: “-->No Log Data<--“
LE & Cancel stored data
K1 & Immediate data printing
K0 & Stop printing data
K4
&
Start logging data
K5
&
Stop logging data
KP
&
Auto-power-off function=ENABLE
KQ
&
Auto-power-off function=DISABLE
WC0
&
Setting SELF off
WC1
&
Setting SELF on
RA Sample print = 0sec Reading of PRINT interval set
RL Sample log = 30sec Reading of LOG interval set
WA# & Setting PRINT interval.
# is a hexadecimal number 0…D that represents the posi-
tion of the interval in the list 0, 1, 5, 10, …, 3600 seconds.
WL#
&
Setting LOG interval.
# is a hexadecimal number 1…D that represents the posi-
tion of the interval in the list 15, …, 3600 seconds.