Delta OHM HD32.3, Руководство по эксплуатации

Страница: 26 / 74

HD32.3
- 26 -
V1.4
8. or press ESC to go back to the menu, without modifying anything;
9. press MENU to exit directly from the main menu.
NOTE: With reference to the time, you can set hour and minuted, the seconds are always set at 00
(set 00 seconds!).
5.2 L
OGGING
M
ENU
Press MENU key to enter into the main menu;
•
Select Logging heading using ▲ ▼ keys;
•
press ENTER : the submenu for the parameters setting involving the Logging section (to
aquired) is visualized.
WBGT Index
2008/11/10 08:00:00
LOGGING MENU
Log interval
Self shut_off mode
Start/stop time
Cancel auto start
Log file manager
<ESC> exit/cancel
5.2.1 Log Interval
Through this heading, it’s possible to set the LOG interval (interval between two acquisition
following samples): to set, go on as indicated below:
enter into
LOGGING submenu (previus paragraph), select Log Interval heading using ▲ ▼ arrow
keys:
WBGT Index
2008/11/10 08:00:00
LOGGING MENU
input LOG interval
as h:mm:ss (1h max)
arrows to correct
or <ESC> now set at:
0:00:15
1. Using ▲ ▼ arrow keys select the interval duration that is between a minimum of 15 seconds and
a maximum of one hour.
2. Press ENTER to confirm and go back to Logging menu.
3. To go back to Logging menu without modifying anything, press ESC .
4. To go back to the main menu, press ESC again.
5. To exit directly from the menu, press MENU .
The values that youc an set are the following ones: 15 seconds - 30 seconds - 1 minute - 2 minutes -
5 minutes- 10 minutes - 15 minutes -20 minutes - 30 minutes – 1 hour